Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #27050

    Gerstner Tool Chests – Style 50

    The Gerstner Style 50 was a low-priced case that featured flush ring pulls instead of drawers knobs.

    The 3 models and their sizes are:
    Style 50 – 16″ wide x 10-3/4″ tall x 9″ deep
    Style 50A – 18″ wide x 10-3/4″ tall x 9″ deep
    Style 50B – 20″ wide x 11″ tall x 9″ deep

    All 3 models had the same 6 drawer layout, with 3 one-third width drawers at 1-1/2″ tall and 3 full-width drawers that were 1″, 2″ and 3″ tall on the inside.

    #28287

    The Gerstner Style 25 was designed for the Tool Maker or Machinist.

    The Dimensions of the case were:
    Style 25 – 15-1/2″ wide x 11-1/4″ tall x 8″ deep (as sitting in the picture above)

    There are 6 drawers with inside heights of 1-1/8″, 3/4″, 7/8″, 1-1/8″, 1-3/4″ and 2-1/2″.

    #28288

    The Gerstner Style 28 was a machinists portable tool case.

    The Dimensions of the case were:
    Style 28 – 15″ wide x 10-3/4″ tall x 8-1/2″ deep

    The Chest had 6 full-width drawers with inside heights of 1-1/8″, 3/4″, 1″, 1-1/4″, 1-7/8″ and 2-3/4″.

    The front lid (door) used the self hinging lid slide system and the inside center panel of the front lid was felt covered.

    #28333

    The Gerstner Style 45 and 55 were popular with mechanics desiring several short drawers.

    The Dimensions of the case are:
    Style 45 – 16″ wide x 11″ tall x 8-1/2″ deep
    Style 55 – 20″ wide x 11-1/2″ tall x 8-1/2″ deep

    The half-width drawers in both style cases are 2-1/4″, 1″ and 1″ tall. The 3 bottom drawers are 1″, 2″ and 3″ tall on the Style 45. The Style 55 long drawers are 1-1/4″, 2″ and 3-1/4″ tall.

    #28385

    The Gerstner Style 70 was designed with deep drawers as a value priced chest that could be used by machinists and mechanics alike.

    The 2 models and their sizes are:
    Style 70 – 16″ wide x 10-1/2″ tall x 9-1/4″ deep
    Style 70B – 20″ wide x 10-1/2″ tall x 9-1/4″ deep

    Both styles had the same drawer layout with 2 half-width drawers on the left and right that were 7/8″ and 1-3/8″ tall. The 2 full-width drawers were 1-7/8″ an 3-3/8″ tall.

    The 70 and 70B were leather covered and offered with either Oak or Mahogany drawer fronts.

    Additional Photos from User459 of a Style 70B Chest.

    #33002

    The Gerstner Style 32 was a nice portable chest with a top handle.

    The Dimensions of the case were:
    Style 32 – 20″ wide x 12-1/4″ tall x 9-1/2″ deep

Viewing 6 posts - 1 through 6 (of 6 total)
  • The topic ‘6-Drawer Products’ is closed to new replies.